D-Link DES-3550 Command Line Interface Reference Manual page 263

create authen_enable method_list_name
Purpose Used to create a user-defined method list of authentication methods for promoting normal
user level privileges to Administrator level privileges on the Switch.
Syntax create authen_enable method_list_name <string 15>
Description This command is used to promote users with normal level privileges to Administrator level
privileges using authentication methods on the Switch. Once a user acquires normal user
level privileges on the Switch, he or she must be authenticated by a method on the Switch
to gain administrator privileges on the Switch, which is defined by the Administrator. A
maximum of eight (8) enable method lists can be implemented on the Switch.
Parameters <string 15> - Enter an alphanumeric string of up to 15 characters to define the given enable
method list the user wishes to create.
Restrictions Only administrator-level users can issue this command.
Example usage:
To create a user-defined method list, named "Permit" for promoting user privileges to Adminstrator privileges:
DES-3550:4#create authen_enable method_list_name Permit
Command: show authen_login method_list_name Permit
Success.
DES-3550:4#
DES-3550 Layer 2 Fast Ethernet Switch
259