D-Link DES-3550 Command Line Interface Reference Manual page 185

show dhcp_relay
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the DHCP relay configuration:
DES-3550 Layer 2 Fast Ethernet Switch
Used to display the current DHCP/BOOTP relay configuration.
show dhcp_relay {ipif <ipif_name 12>}
This command will display the current DHCP relay configuration for the Switch, or
if an IP interface name is specified, the DHCP relay configuration for that IP
interface.
ipif <ipif_name 12> The name of the IP interface for which to display the current
DHCP relay configuration.
None.
DES-3550:4#show dhcp_relay
Command: show dhcp_relay
DHCP/BOOTP Relay Status
DHCP/BOOTP Hops Count Limit
DHCP/BOOTP Relay Time Threshold
DHCP Relay Agent Information Option 82 State : Enabled
DHCP Relay Agent Information Option 82 Check : Enabled
DHCP Relay Agent Information Option 82 Policy : Replace
Interface Server 1
------------ --------------- --------------- --------------- --------------
System 10.58.44.6
DES-3550:4#
Server 2 Server 3
181
: Enabled
: 2
: 23
Server 4