D-Link DES-3550 Command Line Interface Reference Manual page 23

Example usage:
To disable pausing of the screen display when show command output reaches the end of the page:
DES-3550:4#disable clipaging
Command: disable clipaging
Success.
DES-3550:4#
enable telnet
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable Telnet and configure port number:
DES-3550:4#enable telnet 23
Command: enable telnet 23
Success.
DES-3550:4#
DES-3550 Layer 2 Fast Ethernet Switch
Used to enable communication with and management of the Switch
using the Telnet protocol.
enable telnet <tcp_port_number 1-65535>
This command is used to enable the Telnet protocol on the Switch.
The user can specify the TCP or UDP port number the Switch will
use to listen for Telnet requests.
<tcp_port_number 1-65535> − The TCP port number. TCP ports
are numbered between 1 and 65535. The "well-known" TCP port
for the Telnet protocol is 23.
Only administrator-level users can issue this command.
19