VETRON 5000 Instruction Book page 18

INSTRUCTION BOOK
13. SEWING FEET EXCHANGE
1
Push the X-button at the machine head, the red light illuminates showing
the active "blocked mode", or power o the machine before you change the sewing feet.
Failure to comply produces a risk of injury in case of an unintentionally machine operation.
During „blocked mode" the sewing feet have no pressure or position control.
They can be moved by the following method:
01. Press and hold the programmable button on the machine head (lowest button).
02. By turning the JOG KEY the sewing feet can be moved.
03. By loosing screws 1 the sewing feet can be exchanged.
NOTE!
Push the X-button or switch on the machine again and follow the instructions
displayed in the control panel.
18 INSTRUCTION BOOK VETRON 5000
CAUTION! RISK OF INJURY!