Blf Led Mode Configuration; Blf/Blf List Key Led Status And Behavior Configuration; Supported Blf/Blf List Key Behaviors - Yealink SIP-T2 Administrator's Manual

Line Key/Expansion Module Key LED (configured as a BLF key or a BLF List key and BLF LED Mode is set to 4.
This mode is specifically designed for the Ribbon server.)
LED Status
Solid green
Slowly-flashing green (1s) The monitored user does not exist.
Off

BLF LED Mode Configuration

The following table lists the parameters you can use to configure BLF LED Mode.
Parameter features.blf_led_mode
Description It configures the BLF LED mode.
Permitted
0,1,2,3,4 (4 is specifically designed for the Ribbon server)
Values
Default 0
Supported
All phones except T30P, T30, T19(P) E2 and CP920
Devices
Web UI Features > General Information > BLF LED Mode

BLF/BLF List Key LED Status and Behavior Configuration

You can customize the BLF LED status (or the color of BLF icon for T57W/T48U/T48S/T48G phones) and BLF/BLF
List key behavior using the EDK macros if required.
This feature depends on support from a SIP server.
Note
: For more information on EDK macros, refer to
Topics

Supported BLF/BLF List Key Behaviors

BLF Key LED/Icon and Behavior for Idle State Configuration
BLF Key LED/Icon and Behavior for Call-in State Configuration
BLF Key LED/Icon and Behavior for Call-out State Configuration
BLF Key LED/Icon and Behavior for Talking State Configuration
BLF Key LED/Icon and Behavior for Parked-Against State Configuration
BLF Key LED/Icon and Behavior for Hold State Configuration
BLF Key LED/Icon and Behavior for DND State Configuration
Supported BLF/BLF List Key Behaviors
The following behaviors are supported when pressing the BLF/BLF List keys:
newcall - dial out the phone number
l
btransfer - transfer the active call to the monitored user without consulting
l
ctransfer - transfer the active call to the monitored user with prior consulting
l
pickup - pick up the call directly
l
bargein - barge in and set up a conference call
l
custom EDK macros (for example, 1234$Tinvite$) - execute a series of macro action strings
l
intercom - place an intercom call to the monitored number
l
park - park the call to the monitored user, it works only when configuring "blf.enhanced.idle.talking.action"
l
Description
The monitored user is talking.
The monitored user is idle.
Macro Action Strings
<y0000000000xx>.cfg
.
Advanced Features
448