Table of Contents
Advertisement
Safety instructions
Responsibility
WARNING
A.1-20
0 . 0
Maintenance/repair
As a supplier, Siemens will not be held responsible for the safety,
A . 1
reliability, and performance of the system in the following
cases:
Installations, additions, adjustments, modifications, and
repairs to the MR system, or changes to the software that
are not performed by Siemens Service.
Assemblies are not replaced with original spare parts.
The electrical wiring in the room does not meet the require-
ments of VDE regulation 0100-710 or applicable national
laws.
Siemens is not responsible for potential damage in the event
non-authorized personnel refilling the magnet with helium.
Assembling and modifications during the actual service life
require evaluation to the requirements of IEC 60601-1.
Unauthorized work on the magnet!
A . 1
Personal injury, property damage
A . 1
Only authorized personnel (Siemens Magnet Technol-
ogy or Siemens) may perform work on the magnet.
Do not open or remove safety valves and burst disks of
the helium container.
Do not change the standard configuration.
MAGNETOM Family - Safety Information
A . 1
A . 1
A . 1
A . 1
A . 1
0 . 0
0 . 0
Hide quick links:
Advertisement
Table of Contents
