Save Netconfig Data (Function Code: 18) - Brother DCP-L5500D Service Manual

1.3.7 Save NetConfig data (function code: 18)

<Function>
This function is used to save NetConfig data to the USB flash memory.
<Operating Procedure>
(1) Press the [2], and then the [5] key in the initial state of maintenance mode.
"NETCONFIG" is displayed on the LCD.
(2) Insert the USB flash memory into the USB flash memory terminal.
(3) Press the [SET] key. "SAVE TO USB" is displayed on the LCD.
(4) Press the [SET] key. "USB SAVING" is displayed on the LCD, and NetConfig data is
saved to the USB flash memory. The machine returns to the initial state of maintenance
mode.
5-13
Confidential