Display Machine Log Information (Function Code: 80) - Brother DCP-L5500D Service Manual

1.3.28 Display machine log information (function code: 80)

<Function>
This function is used to display the log information on the LCD.
<Operating Procedure>
(1) Press the [8], and then the [0] key in the initial state of maintenance mode.
"MACERR_01:****" is displayed on the LCD (**** indicates error code).
(2) Pressing the [▲] or [▼] key changes the display item.
(3) Press the [X] key, and the machine returns to the initial state of maintenance mode.
Maintenance information
LCD
MACERR_##:0000
USB:000G8J000166
MAC:008077112233
PCB:911309123456
KTN_ERM:87%
KTN_RRM:67%
DRUM_PG:00000000
PFMP_PG:00000000
PFK1_PG:00000000
PFK2_PG:00000000
PFK3_PG:00000000
PFK4_PG:00000000
PFK5_PG:00000000
FUSR_PG:00000000
LASR_PG:00000000
TTL_PG:00000000
DX_PG:00000000
TTLCOPY:00000000
DX_COPY:00000000
TTLPCPT:00000000
DX_PCPT:00000000
TTLFAX:00000000
DX_FAX:00000000
TTL_OTH:00000000
DX_OTH:00000000
Machine error log (last ten errors)
*2
Serial number
MAC address
Main PCB serial number
Estimated remaining toner amount based on the average coverage
Estimated remaining toner amount based on the rotations of
develop roller
Printed pages for drum unit
Pages fed from PF kit MP
Pages fed from PF kit 1
Pages fed from PF kit 2
Pages fed from PF kit 3
Pages fed from PF kit 4
Pages fed from PF kit 5
Printed pages for fuser unit
Printed pages for laser unit
Total number of pages printed
Paper input for duplex tray
Total pages copied
Total pages copied on both sides
Total pages printed via PC
Total two-sided pages printed via PC
Total List / Fax pages printed
Total List / Fax pages printed on both sides
Total pages printed by other methods
Total two-sided pages printed by other methods
5-53
Description
*1
*3
*3
Confidential