Brother DCP-L5500D Service Manual page 337

LCD
Auto LF Auto linefeed (LF) setting
Auto CR Auto carriage return (CR) setting On/Off
Auto WRAP Auto CRLF by print width
Auto Skip Back end / tip skip setting
Left Margin Left margin setting
Right Margin Right margin setting
Top Margin Top margin setting
Bottom Margin Bottom margin setting
Lines Text lines per page
Error Print Error Print setting in the event of
PostScript error

Detail description
LCD
Manual Feed Valid for printing from the computer, and for printing NetWorkConfig,
TestPrint, Fontlist, or Configuration from the panel. When the tray is selected
on the computer, the setting on the computer supersedes the setting on the
LCD.
Resolution Valid for printing from the computer only. When the resolution is set on the
computer, the setting on the computer supersedes the setting on the LCD.
Toner Save Valid for all types of printing except copy, and the Function Menu setting will
also be changed. When the TonerSave is set on the computer, the setting
on the computer supersedes the setting on the LCD.
Density Valid for printing from the computer, and for printing NetWorkConfig,
TestPrint, Fontlist, or Configuration from the panel. Linked with the Toner
Save setting, and the density is determined based on both settings. When
the Density is set on the computer, the setting on the computer supersedes
the setting on the LCD.
JB-Can Time Sets the time until the host timeout after a job is canceled. The setting unit
is on the second time scale.
Sleep Time Sets the time until the sleep mode is entered. The Function Menu setting will
also be changed.
Page Protection Sets the page memory to be secured for data processing before printing in
the computer. As this is a setting in the PCL-Core, this does not affect the
memory management of the machine.
Emulation Changes the print language. The Function Menu setting becomes valid. For
data with ENTERLANGUAGE, this setting supersedes the setting on the LCD.
Auto I/F Time Change the interface open time. This setting becomes valid when PC print
is instructed, and becomes invalid when PC-Scan or Remote-SetUp is
instructed.
Media Type Valid for printing from the computer only. When the Paper type is set on the
computer, the setting on the computer supersedes the setting on the LCD.
The default varies depending on the country setting. "Thin" is the default for
China and "Plain" is the default for other countries.
Description
Detail description
5-22
Set value
On/Off
On/Off
On/Off
0 to 145 columns
10 to 155 columns
0 to 2.00 inches
0 to 2.00 inches
5 to 128 lines
On/Off
Default
Off
Off
Off
On
0 column
80 columns
0.5 inches
0.5 inches
60 lines
On
Confidential