Table of Contents
Advertisement
(4) Push the link arm in the direction of the arrow A, and turn the roller holder ASSY to
remove the boss.
(5) Slide the roller holder ASSY in the direction of the arrow B to remove it from the shaft,
and remove the roller holder ASSY.
<Bottom side>
Assembling Note:
• When attaching the roller holder ASSY, engage "A" on the shaft of the roller holder
ASSY with the hole on the feed frame ASSY, and insert the shaft into the hole.
Boss
Roller holder ASSY
A
Link arm
Fig. 7-24
7-21
"A"
B
Shaft
Feed frame ASSY
<Front side>
Confidential
Advertisement
Table of Contents
Troubleshooting
