Brother DCP-L5500D Service Manual page 142

 Fogging
Step
Toner amount detection sensor
1
PCB (light reception) failure
2 Relay front PCB failure
High-voltage power supply PCB
3
failure
4 Main PCB failure
Note:
• This problem tends to occur when the life of the drum unit or toner cartridge is expiring.
<User Check>
• Check the usage environment of the machine. Using the machine in
hot-humid or cold-dry conditions can cause this problem.
• Check that the acid paper is not used.
• This problem may disappear after printing multiple sheets of paper.
• Replace the toner cartridge with a new one.
• Replace the drum unit with a new one.
Cause
2-107
Remedy
Replace the toner amount detection sensor
PCB ASSY (light reception).
Replace the relay front PCB ASSY.
Replace the high-voltage power supply PCB
ASSY.
Replace the main PCB ASSY.
Confidential