Back Cover / Outer Chute - Brother DCP-L5500D Service Manual

Hide thumbs Also See for DCP-L5500D:

Table of Contents

9.3 Back cover / Outer chute

(1) Open the back cover.

(2) Push both ribs of the back cover in the direction of the arrows, and remove the two

bosses on the outer chute.

• Be careful not to damage the ribs inside the back cover.

Rear nip release link

Assembling Note:

• When attaching the back cover, open the front cover and attach the back cover

while lifting the rear nip release link.

(3) Remove the back cover from the boss A, and remove the back cover.

(4) Open the outer chute approximately 80 degrees. Remove the outer chute from the boss

B, and remove the outer chute from the machine.

Confidential