Table of Contents
Advertisement
(4) Slide the CIS carriage slowly to the position described below.
(5) Raise the first side CIS unit from the CIS carriage for 90 degrees. Slide the first side CIS
unit in the direction of the arrow and release the boss to remove it. Disconnect the first
side CIS flat cable from the first side CIS unit.
First side CIS flat cable
First side CIS unit
Boss
CIS carriage
Harness routing: Refer to
Assembling Note:
• If you replaced the first side CIS unit, refer to
FIRST SIDE CIS UNIT, SECOND SIDE CIS UNIT OR DOCUMENT SCANNER UNIT"
in chapter 4
Fig. 3-62
"5. Document scanner
and configure the setting.
3-66
First side CIS unit
unit".
"5. IF YOU REPLACE THE ADF UNIT,
Boss
CIS carriage
Confidential
Advertisement
Table of Contents
Troubleshooting
