Native Instruments MASCHINE Manual page 836

If MASCHINE is running as a standalone application you can also use the
in the Application Menu Bar:
The MASCHINE instance takes the focus of your KOMPLETE KONTROL S-SERIES key-
→
board.
In MASCHINE the Controller
keyboard:
▪ The first section (above the separator line) allows you to select your MASCHINE controller:
◦ The section lists all devices of the MASCHINE controller family.
◦ Grayed out entries indicate controllers that are not connected to your computer. You
cannot select them.
◦ Black entries indicate connected controllers. Select any of them to bring its focus to
this MASCHINE instance.
◦ Only one item can be selected at a time. It is indicated by the check mark. Selecting
another controller automatically deselects the one previously selected in this section
— in other words, only one controller from the MASCHINE controller family can focus
on a particular MASCHINE instance at a time.
▪ The second section (below the separator line) lists all KOMPLETE KONTROL S-SERIES
keyboards. It works in exactly the same way as the first section described above, with the
same features and restrictions.
menu allows you to select your KOMPLETE KONTROL S-SERIES
KOMPLETE KONTROL Integration
Switching the Keyboard Focus to/from a MASCHINE Instance
Controller
MASCHINE - Manual - 836
menu