Native Instruments MASCHINE Manual page 735

3. When the insertion line appears at the desired location, release the mouse button.
The Section takes its new place. On your controller in Section mode, you can now select
→
this Section via the pad corresponding to its new location.
Moving a Section using the Controller
To move a Section using your controller:
1. Press NAVIGATE + Button 3
the Arranger view).
2. Press and hold SCENE
3. Press Button 7 and 8 to select the Section bank containing the Section you want to move.
4. Press the pad of the Section you want to move. Alternatively you can select the Section by
pressing the Page buttons.
5. Turn Knob 1 (POSITION) to move the selected Section to another position in your ar-
rangement.
The Section takes its new place. In Section mode you can now select this Section via the
→
pad corresponding to its new location.
ARRANGER to access Arranger view (if you are not already in
to enter Section mode (you can pin it by pressing Button 1).
Working with the Arranger
Using Arranger View
MASCHINE - Manual - 735