Native Instruments MASCHINE Manual page 277

3. If you want to bypass a Plug-in of a Sound, click the Group of its parent Group in the Ar-
ranger, click the desired Sound slot on the left of the Pattern Editor, and click the
SOUND tab in the top left corner of the Control area.
4. In the Plug-in List, click the icon left to the Plug-in name (keys for an Instrument Plug-in,
FX for an Effect Plug-in) to bypass this Plug-in.
The Plug-in does not affect the sound anymore. The icon is grayed out to indicate that
this slot is now bypassed.
Use the same method to unmute the Plug-in:
To activate the bypassed slot again, click its grayed out icon.
►
In most cases the first Plug-in slot contains an Instrument Plug-in (e.g., a Sampler). Be
careful: bypassing the slot will mute the whole Sound!
Bypassing a Plug-in Slot on the Controller
1. Press the CONTROL
2. If you want to bypass a Plug-in of the Master, press Button 1 to select the
3. If you want to bypass a Plug-in of a Group, press Button 2 to select the
press the Group button
SHIFT + the desired Group button
Group.
4. If you want to bypass an effect of a Sound, press Button 3 to select the
lect its parent Group as described in the previous step, and press
that Sound (or simply hit its pad if pads are in Group mode).
5. Make sure PLUG-IN
button to enter Control mode.
A–H corresponding to the desired Group. If necessary, first press
A–H to switch to the Group bank containing that
(Button 6) is activated to show the Plug-in slots.
Working with Plug-ins
Plug-in Overview
MASTER tab.
GROUP tab and
SOUND tab, se-
SELECT + the pad of
MASCHINE - Manual - 277