13.2.11 Naming Scenes - Native Instruments MASCHINE Manual

13.2.11 Naming Scenes

By default, Scenes are named
use custom names of your own. Naming is only available from within the software, but any
changes will also show up on your controller.
Renaming Scenes in the Arranger
To rename a Scene in the Arranger:
1. Double-click the Scene name at the top of the Arranger:
You can also right-click ([Ctrl]-click on Mac OS X) the Scene slot or the corresponding cell
in the pad grid and select Rename from the context menu:
The Scene name gets highlighted and editable.
2. Type a name and press [Enter] on your computer keyboard to confirm (or press [Esc] to
cancel you change).
The Scene is renamed.
→
If you use MASCHINE as a plug-in, some hosts will utilize the [Enter] key, as it is map-
ped to some function of the host software. In this case, click anywhere else in the MA-
SCHINE plug-in window to confirm the name you have entered.
Scene 1, Scene 2, Scene 3, etc. You can rename Scenes and
MASCHINE - Manual - 723
Working with the Arranger
Using Ideas View