Native Instruments MASCHINE Manual page 462

Assigning the Macro Controls is possible in the software only.
Opening the Pages Pane in the Assignment Area
First of all, you need to open the
do this:
1. Select the Macro properties of the desired channel (Sound, Group, or Master) as descri-
bed in section ↑2.3.4, Navigating Channel Properties, Plug-ins, and Parameter Pages in
the Control Area.
2. Click the down-pointing arrow in the bottom left corner of the Control area to reveal the
Assignment area underneath:
3. Click the Pages tab in the left part of the Assignment area:
The Pages tab lights up and the
→
assign Macro Controls to parameters.
Once the Assignment area is open, when you switch to other Parameter pages the As-
signment area follows your selection: it always shows the assignments for the page cur-
rently displayed above.
The Pages tab can be clicked only for Plug-ins, External MIDI device Control Change as-
signments, and for Macro properties. For all other Plug-ins and Channel properties, pa-
rameters and Parameter pages are not editable, and the
active. For more information on how to assign parameters of Native Instruments or Ex-
ternal Plug-ins to Parameter pages, please refer to
eter Pages.
Pages pane of the Assignment area for Macro properties. To
Pages pane appears on its right. You are now ready to
↑6.3.3, Setting Up Your Own Param-
Audio Routing, Remote Control, and Macro Controls
Creating Custom Sets of Parameters with the Macro Controls
Pages tab is grayed out and in-
MASCHINE - Manual - 462