Send Midi Clock - Native Instruments MASCHINE Manual

If you want to configure MASCHINE to react to other MIDI messages than MIDI Clock,
in particular if you want to control MASCHINE notes and parameters via MIDI, please
refer to section ↑8.2, Using MIDI Control and Host
in detail.
2.7.3

Send MIDI Clock

If MASCHINE is running as a stand-alone application, it can also send a MIDI Clock signal to
any device that is capable of receiving MIDI Clock. This could be hardware such as a drum
machine, another groovebox, or even another software sequencer.
If you use MASCHINE as a plug-in, it cannot send any MIDI Clock signal. See section
↑2.5, Stand-Alone and Plug-in Mode
plug-in.
To configure MASCHINE to receive MIDI Clock from an external device:
1. Select Preferences entry from the
2. Select the MIDI page.
3. In the Sync section select Master (Send Clock) from the menu.
Automation, where this is described
for more information on using MASCHINE as a
File menu.
Basic Concepts
Integrating MASCHINE into Your MIDI Setup
MASCHINE - Manual - 100