Native Instruments MASCHINE Manual page 328

1. Hold GRID to enter Grid mode.
2. Press Button 4 (STEP) to access the Step and Nudge Grid settings.
The right display will show you which pad represents a resolution:
3. Select a step size by pressing the corresponding pad. Alternatively you can repeatedly
press Button 5–8 to successively select each of the resolutions in the corresponding col-
umn.
The selected value is highlighted on the right display and the corresponding pad turns
→
fully lit.
To disable the Step Grid, simply select the
To disable the Step Grid, hold GRID, press Button 4 (STEP), then press pad
►
You don't need to explicitly enable the Step Grid on your controller: It is enabled as
soon as you select a step size other than
Adjusting the Nudge Grid
To change the Nudge Grid resolution:
1. Hold GRID to enter Grid mode.
2. Press Button 4 (STEP) to access the Step and Nudge Grid settings.
3. Turn Knob 4 (NUDGE) to select the desired Nudge Grid resolution.
The new Nudge Grid resolution is directly in use — provided that the Step Grid is ena-
→
bled (see above).
OFF value in the top right corner:
OFF (pad 16).
Working with Patterns
Pattern Basics
16 (OFF).
MASCHINE - Manual - 328