Native Instruments MASCHINE Manual page 610

9. Turn Knob 5 to browse the available Plug-ins.
10. When you have found the effect you want to use (e.g., the MASCHINE Compressor), press
Button 8 (LOAD) to load it. You can also use Button 5/6 to step through the list and load
each effect directly.
11. Switch back to Control mode by pressing
again).
Now you can edit the effect parameters using Knobs 1–8 and the Page buttons as usual
→
(see ↑2.3.4, Navigating Channel Properties, Plug-ins, and Parameter Pages in the Control
Area). When you load an effect into the first Plug-in slot of a Sound, MASCHINE auto-
matically configures the Sound's input to receive any signal(s) coming from other Sounds
and Groups in your Project and sends them through its own Plug-in slots — in other
terms, you now have a send effect.
You could also load an effect preset from the Browser instead of using the Plug-in
menu. For more information on how to load effect presets, see
Loading Files from the
Now that the effect is loaded, we suggest that you rename the Sound slot to the Plug-in name:
this will be of great help when routing other signals to that send effect (see section below). You
can rename the Sound slot in the software as follows:
1. Double-click the name of the Sound slot in the Sound List.
The name gets highlighted, ready to be edited.
2. Type the name of the Plug-in, and press [Enter] on your computer keyboard to confirm.
The Sound slot now mirrors the Plug-in name.
→
For more information on renaming Sound slots, see section
Slots.
CONTROL
Library.
(or by pressing SHIFT
↑3.2, Searching and
↑4.2.3, Renaming Sound
MASCHINE - Manual - 610
Using Effects
Creating a Send Effect
+ BROWSE