Native Instruments MASCHINE Manual page 657

The Reverb in the Control area (Main page depicted).
Main Page
Element
ROOM Section
Mode
Reverb Time
Reverb Size
COLOR Section
Damping
Modulation
Description
Allows you to choose one of three basic modes of Reverb: Room,
Hall, and Plate (default: Room).
Adjusts the reverb decay time. Turn clockwise to increase decay.
Available values range can be adjusted in seconds from 0.5s to
20.2s (default: 1.0s).
Adjust the size of the simulated room. Turn clockwise to increase
the perceived size of the room and reverb reflections. Available
values range from 0.0 to 100.0% (default: 20.0%).
Adjusts damping of the high frequencies in the reverb signal.
Damping refers to the rate at which the high frequencies decay.
This effect causes the sound to become gradually muffled and
warmer. Available values range from 0.0 to 100.0% (default:
50.0%).
Sets the modulation amount. A value of 0 turns the delay
modulation off. Available values range from 0.0 to 100.0%
(default: 50.0%).
Effect Reference
Spatial and Reverb Effects
MASCHINE - Manual - 657