Snare - Volt - Native Instruments MASCHINE Manual

▪ Vintage: ↑10.3.6, Snare – Vintage
▪ Chrome: ↑10.3.7, Snare – Chrome
▪ Iron: ↑10.3.8, Snare – Iron
▪ Clap: ↑10.3.9, Snare – Clap
For more information on engines, see
Drumsynth. For general information on the Snare and the other Drumsynths, see
Drumsynths – General
10.3.1 Snare – Volt
The Volt engine is the default engine of the Snare.
The Volt snare is an electronic snare based on a family of analog classics.
The parameters described below are presented as they appear in the Control area (Ar-
range view). The same parameters are available in the Plug-in panel within the Plug-in
Strip (Mix view). See
Main Page
Element
MAIN Section
Engine
Tune
Decay
↑10.1.1, Engines: Many Different Drums per
Handling.
↑9.4, The Plug-in Strip for more information on this.
Description
Selects the engine used in the Snare Plug-in. If you change this
setting, please refer to
Adjusts the pitch of the drum played by the middle C, measured in
MIDI note numbers and cents. Available values range from 53.00 to
77.00. The default value is 65.00. For more details see
Pitch Range, Tuning, and MIDI
Adjusts the duration of the sound's tail, measured as a percentage.
Available values range from 0.0 to 100.0 % (default: 50.0 %).
↑10.3, The Snares.
Notes.
Using the Drumsynths
The Snares
↑10.1,
↑10.1.5,
MASCHINE - Manual - 528