Native Instruments MASCHINE Manual page 243

3. To change the groove of an individual Sound, hold its pad (or hold
pads are in Keyboard mode) and turn the
press SELECT + the pad of the desired Sound, then hold any pad (i.e. any pitch of that
Sound) and turn the
The adjusted groove value is temporarily shown on the left display.
→
Hold SHIFT while you turn the knob to adjust the value in finer increments.
These shortcuts control the
Group's, and Sound's Groove properties, respectively. See section --- MISSING LINK ---
for a detailed description of these properties.
In the software you can also adjust the Swing amount of your Project via the
the Header:
The SWING control in the software's Header.
Tempo and Tune Shortcuts
1. To change the tempo of the Master (i.e. the tempo of your Project), simply turn the
PO knob.
2. To change the tune of all Sounds in a Group, hold the desired Group button (first navigate
to its Group bank if necessary) and turn the
3. To change the tune of an individual Sound, hold its pad (or hold
are in Keyboard mode) and turn the
SELECT + the pad of the desired Sound, then hold any pad (i.e. any pitch of that Sound)
and turn the TEMPO
The adjusted tempo or tune value is temporarily shown on the left display.
→
Hold SHIFT while you turn the knob to adjust the value in finer increments.
SWING
SWING knob.
AMOUNT parameter in the
TEMPO
knob.
knob. In Keyboard mode you can also
SWING page of the Master's,
TEMPO knob.
SELECT
knob. In Keyboard mode you can also press
Playing on Your Controller
Playing Tools
SELECT + its pad if
SWING control in
TEM-
+ its pad if pads
MASCHINE - Manual - 243