Native Instruments MASCHINE Manual page 242

Level Shortcuts
1. To change the output level of the Master (i.e. the overall output level of MASCHINE), sim-
ply turn the VOLUME
2. To change the output level of a Group, hold its Group button (first navigate to its Group
bank if necessary) and turn the
3. To change the output level of an individual Sound, hold its pad (or hold
if pads are in Keyboard mode) and turn the
also press SELECT
that Sound) and turn the
The adjusted level value is temporarily shown on the left display.
→
Hold SHIFT while you turn the knob to adjust the value in finer increments.
These shortcuts control the
Group's, and Sound's Output properties, respectively. See section --- MISSING LINK ---
and --- MISSING LINK --- for a detailed description of these properties.
In the software you can also adjust the output level of the Master via the Master Volume slider
in the Header:
The Master Volume slider in the software's Header.
To reset the output level of the Master to 0 dB, double-click the Master Volume slider.
Groove Shortcuts
1. To change the groove of the Master, simply turn the
2. To change the groove of a Group, hold its Group button (first navigate to its Group bank if
necessary) and turn the
knob.
VOLUME knob.
+ the pad of the desired Sound, then hold any pad (i.e. any pitch of
VOLUME knob.
LEVEL parameter in the
SWING knob.
VOLUME knob. In Keyboard mode you can
AUDIO page of the Master's,
SWING knob.
Playing on Your Controller
Playing Tools
SELECT + its pad
MASCHINE - Manual - 242