Table of Contents
Advertisement
(3) CN3 (P0 I/O connector)
This is a user connector to input/output the P00 to P03 port signals. The P00 to P03 terminals of the
actual IC are shared with the terminals for R/f converter channel 0. The S5U1C6F632P2 board provides
this connector separated with the R/f converter socket and monitor pins shown in (1) above. Therefore,
be sure to leave this connector open when R/f converter channel 0 is used.
(4) CN4 (LCD connector)
This is a user connector to output the COM and SEG signals of the LCD driver. There are two connec-
tors provided: one is for 1/5 bias and another is for 1/4 bias. Be sure to use one of them according to the
specification of the target system. Use of the both connectors at the same time may cause a malfunction.
SIC63616-(Rev. 1.0) NO. P209
3240-0412
Advertisement
Table of Contents
