Selecting And Cutting Edging To The Correct Length - Festool CONTURO User Manual

Selecting and cutting edging to the correct length

1
Select the edging height according to the thickness of the
prepared panel material and include an overhang of approx.
4 mm.
3
Simply score the edge band (plastic side) with a knife to
ensure a clean separating cut.
24
2
You should add approx. 10 cm to the length of the edging.
EDGING OVER 1.5 M IN LENGTH
If the edging is longer than 1.5 m, it is more convenient
to work with the edging holder.
4
It is then easy to break off.
 Page 31