Festool CONTURO User Manual page 68

6. Tips and tricks
Some components of the Festool system make working with the CONTURO even easier because all components
have been adapted perfectly to one another. Below are a few examples of how to make your daily work easier.
Plan for VAC SYS workstation
When working with the CONTURO, the workpiece must be secured firmly before any edging can be affixed.
And round workpieces that cannot be clamped from edge to edge must be accessible from all sides.
Many tasks described in this manual were therefore performed with a Festool VAC SYS vacuum clamping
system adapted perfectly to the correct working height of the CONTURO. You can find the plan for this
workstation and other tips here.
1 2
68