Stationary Gluing Of Straight Edges - Festool CONTURO User Manual

Stationary gluing of straight edges

To glue onto straight edges, place the CONTURO in a horizontal position and guide the workpiece past it.
This working method is very practical for small or narrow workpieces that are difficult to clamp.
1
Set edging height with some play so that the edging slides
smoothly through the machine.
3
Ensure the correct speed is selected before you begin the
gluing process, as both of your hands will be placed on the
workpiece.
42
2
Then press the start button and guide the machine towards
the edge.
4
Position the workpiece at a distance of 2 cm from the contact
roller and press the start button again.