Festool CONTURO User Manual page 43

5
As soon as the glued edging becomes visible, press the workpiece against the contact roller.
6
Guide the workpiece along the contact roller while applying
even pressure.
TIP When processing rigid or brittle edging in the stationary
unit, it is also advisable to work with the additional roller
(included with the adapter plate). Screw on the additional
roller and guide the workpiece along it at a slight angle. The
edging has a larger bending radius and does not break as
easily.
The additional roller can be used for applications such as
tight inner and outer curves or mobile applications – both
rollers press down the edging and the extended pressure
zone achieves better adhesion.
3
43