3.2 Preparing the machine and edge
A few settings must be configured before the CONTURO can be operated. The display on the machine
automatically guides you through the necessary steps.
Preparing the machine
1
Secure the support base first using the accompanying screw.
3
You can use the temperature preselection switch to adjust the
temperature according to the colour of the adhesive cartridge
selected.
CORRECT TEMPERATURE
Setting 1 = 190 °C for natural coloured adhesive
Setting 2 = 200 °C for white adhesive
22
2
Insert a minimum of two adhesive cartridges before using
for the first time.
CHANGING COLOURS
Page 63
Changing colours, refilling, etc. Chapter 5
4
Now press and hold the ON button until the Festool logo
appears on the display.