Festool CONTURO User Manual page 38

Attachment of edging to inner corners
Inner corners of 90° are usually found on corner cabinets and shelves, which incorporate compartment
or carcass bases. Edging these panels is challenging because the inner corners must be glued.
1
Ensure you clean and trim the leading end of the edging
perfectly perpendicular, as it forms part of the join.
3
As soon as the end of the edging is positioned precisely in the
inner corner, guide the machine out of the corner with an even
pressure. At the same time, press down the end of the edging
in the inner corner with the thumb on your right hand to
achieve maximum adhesion.
38
2
Place the CONTURO on the workpiece in the usual way and
position the machine on the inner corner. Press the start button
to feed the edging automatically.
NOTE Always work with the additional roller!
4
Always work with the slowest feed speed when affixing edging
to inner corners (speed 1).
TIP If the edging is longer, it may make sense to engage
the help of another person to generate the required contact
pressure on the inner corner.