Festool CONTURO User Manual page 27

Mobile gluing of straight edges
1
Position the CONTURO with the edging inserted and the
support base resting on the workpiece. Maintain a distance
of approx. 2 cm between the workpiece and contact roller.
The machine must be aligned at a 90° angle to the panel edge.
The marking line is located at the leading edge of the panel.
3
As soon as the edging becomes visible to the right of the
mark, start the gluing process by guiding the machine along
the edge of the workpiece. The machine then feeds the edging
automatically, all you have to do is guide the machine while
applying constant pressure.
2
Press the start button again. The edging is automatically
coated with glue and fed along the workpiece. The machine
now operates automatically without the user having to hold
the start button pressed down.
4
You have the option of selecting one of two speed settings.
You can change the speed at any time, even during the gluing
process. Simply press the button for the feed speed momen-
tarily to increase or decrease the speed of the machine. This
function is extremely useful for attaching edging to tight curves.
3
27