Adjusting The Edge Height - Festool CONTURO User Manual

Adjusting the edging height
1
Slide the edge band into the edging infeed.
NOTE Note that the edging height can only be adjusted at
operating temperature.
3
Briefly press the start button.
2
Use the rotary knob to adjust the edging height until the
edge band touches at the top and bottom. Then turn back
the switch 1–2 locking positions so that there is some play
in the edge band.
4
When the symbol for inserting the edging appears, guide the
edging into the active infeed until it is drawn in. When the tick
mark appears on the display, the edging has reached starting
position and the machine is ready for gluing.
3
25