Festool CONTURO User Manual page 72

Attaching the VAC SYS to the MFT
The multifunction table MFT/3 provides another option for working with the VAC SYS. Since the working
height of a VAC SYS mounted on the MFT is too high for most users working with the CONTURO, we
recommend the following adaptation:
Ø 0,6
Ø 0,6
87,5
Ø 0,6
For example, use a birch multiplex panel with a thickness of
23 mm (500 mm x 250 mm). Drill holes with a diameter of
6 mm according to the drawing. The VAC SYS is secured with
4 x M5 60 mm carriage bolts and 4 x M5 wing screws with
washers.
72
500
Ø 0,6
325
The board is secured to the MFT via the groove on the side
profile of the MFT. Compatible keys and rotary knobs are
available from Festool as spare parts: 2 x 437377 key,
2 x 482110 rotary knob
Ø 0,6
87,5
Ø 0,6