Festool CONTURO User Manual page 33

Mobile attachment of edging to round panels
The greatest challenge when affixing edging to round panels is creating a clean join at the point where
one end of the edging meets the other. The Festool trimming machine is also extremely practical in this
regard.
When attaching edging to circular panels, it is important that
the workpiece can be accessed from all sides without having
to change the clamping position. We recommend using the
VAC SYS vacuum clamping system, which can secure the
workpieces quickly and safely, rotate them 360° and tilt them
up to 90°.
1
When cutting the edge band to size, make sure that you add
approx. 10 cm to the overall band length. Trim the leading end
of the edging exactly perpendicular because it forms part of
the join.
Pads of different shapes and sizes are available for a wide
range of workpieces and can be changed without using tools.
They are manufactured from high-quality plastic which is so
soft and flexible that even high-gloss polished surfaces remain
free of scratches and damage.
2
Glue the edge in the usual way. The edging holder is a practical
accessory that offers maximum freedom of movement and
protection of the edging.
3
33