Edge Finish - Festool CONTURO User Manual

3.5 Edge finish

MFK 700 EDGE ROUTER
SCRAPER
46
Once the edging is glued and trimmed, add the finishing touches: cut
away overhanging material, smooth edging, finish corners and polish
edging to a high gloss finish if necessary.
Ideal for routing edging: the Festool MFK 700 Basic edge router with
spring-loaded ball bearing guide brake and chip deflector. This is
designed specially for machining the most delicate of edging without
leaving behind marks.
The scraper is made from durable solid carbide and was specially
designed for smoothing edges. The scraper has three integral edges
(R1, R1.5 and R2 mm) for smoothing routed curves and rounding thin
edging.
Resting the scraper on the attached
cord ensures perfect guidance.
The three different edges on the scraper
allow you not only to smooth down
edging, but also round thin edging.