28 April 2005
PAPER EXIT
6.11.4 SWITCHING EXITS
Paper longer than A1 sideways paper must
exit at the rear, because the front paper
exit does not have a large tray.
[B]
Selecting the paper exit on the operation
panel switches the paper junction gate
solenoid [A] on and off to open and close
the junction gate [B], which selects the
paper exit path.
The machine does not automatically select
the correct exit if the paper is longer than
A1 LEF. Change the exit selection on the
[A]
operation panel.
B188D958.WMFF
6.11.5 EXIT JAM DETECTION
The exit sensor [A] in front of the rear exit
rollers [B] detects paper jams.
[B]
[A]
B188D959.WMFF
6-57