Application Merge - Ricoh Aficio 480W Dolphin-C2 Service Manual

SPECIAL PROCEDURES WITH SD CARDS

Application Merge

1. Turn the machine off.
2. Insert the source SD card in Slot 1. This is the card that holds the application
that you want to move.
3. Insert the target SD card in Slot 3. This is the card that will receive the
application moved from Slot 1 and be used with the machine for daily operation.
4. Turn the machine on.
5. Enter the SP mode, do SP5873 001 and touch [Execute].
6. When the message prompts you to continue, touch [Execute].
A message appears and informs you that the merge is finished and prompts
you to switch off the machine.
7. Touch [Close] in the message box.
8. Turn the machine off.
9. Remove the SD cards and confirm the following:
• The DOS SD card must be in Slot 2.
• The GW Scanner SD card must be in Slot 3.
10. Turn the machine on.
11. Enter the User Tools mode and confirm that the machine recognizes the
options.
Important!
• Instruct the customer to save the original SD cards.
• Although the original SD cards are disabled after merging, they serve as
proof of purchase for the customer.
• They can also be restored to full use with the Undo feature (see next section).
5-6
28 April 2005