Ricoh Aficio 480W Dolphin-C2 Service Manual page 256

28 April 2005
5845 Delivery Server
These are delivery server settings.
001 FTP Port No.
[0~65535/1]
002 IP Address
Use this SP to set the Scan Router Server address. The IP address under
the transfer tab can be used with the initial system setting.
[0~FFFFFFFF/1]
006 Delivery Error Display Time
Use this setting to set the length of time that the message is shown when
a test error occurs during document transfer with the NetFile application
and an external device.
[0~999/1 sec.]
008 IP Address (Secondary)
Sets the IP address that is given to the computer that is the secondary
delivery server for Scan Router. This SP lets you set only the IP address,
and does not refer to the DNS setting.
009 Delivery Server Model
Lets you change the model of the delivery server that is registered by the
I/O device.
0: Unknown
1: SG1 Provided
2: SG1 Package
3: SG2 Provided
4: SG2 Package
010 Delivery Svr. Capability
Changes the functions that the registered I/O device can do.
[0~255/1]
Bit7 = 1 Comment information exits
Bit6 = 1 Direct specification of mail address possible
Bit5 = 1 Mail RX confirmation setting possible
Bit4 = 1 Address book automatic update function exists
Bit3 = 1 Fax RX delivery function exists
Bit2 = 1 Sender password function exists
Bit1 = 1 Function to link MK-1 user and Sender exists
Bit0 = 1 Sender specification required (if set to 1, Bit6 is set to "0")
011 Delivery Svr.Capability (Ext)
These settings are for future use. They will let you increase the number of
registered devices (in addition to those registered for SP5845 010).
There are eight bits (Bit 0 to Bit 7). All are unused at this time.
SP (SERVICE PROGRAM) MODE TABLES
5-79