CASSETTE TRAY B759
Guide Screws, Caution Decal, Heater Harness
[B]
[A]
1. Put the guide screws [A] (! x2) in the holes.
2. Attach the temperature caution decal [B].
3. Attach the small harness clamps (x4) [C] to the holes (%, &, ', () on the left
side of the frame inside the drawer.
4. Attach the small grommet [D] to the hole.
5. Insert the small end of the heater harness [E] through the grommet and pull it to
the front.
6. Close the harness clamps [C] on the harness.
120 mm ± ± ± ± 3mm
B759I005.WMF
'
&
%
[C]
[E]
1-34
(
28 April 2005
[D]
B759I006.WMF