Ricoh Aficio 480W Dolphin-C2 Service Manual page 281

SP (SERVICE PROGRAM) MODE TABLES
8221 ADF Org Feeds
These SPs count the number of pages fed through the ADF for front and back
side scanning.
001 Front
002 Back
• When 1 sheet is fed for duplex scanning the Front count is 1 and the Back count
is 1.
• If a jam occurs during the job, recovery processing is not counted to avoid double
counting. Also, the pages are not counted if the jam occurs before the first sheet
is output.
8231 Scan PGS/Mode
These SPs count the number of pages scanned by each ADF mode to determine
the work load on the ADF.
001 Large Volume
002 SADF
003 Mixed Size
004 Custom Size
005 Platen
• If the scan mode is changed during the job, for example, if the user switches
from ADF to Platen mode, the count is done for the last selected mode.
• If the user selects "Mixed Sizes" for copying in the platen mode, the Mixed Size
count is enabled.
• In the SADF mode if the user copies 1 page in platen mode and then copies 2
pages with SADF, the Platen count is 1 and the SADF count is 3.
[0~9999999/1]
Number of front sides fed for scanning:
With an ADF that can scan both sides simultaneously, the Front
side count is the same as the number of pages fed for either
simplex or duplex scanning.
With an ADF that cannot scan both sides simultaneously, the
Front side count is the same as the number of pages fed for
duplex front side scanning. (The front side is determined by which
side the user loads face up.)
Number of rear sides fed for scanning:
With an ADF that can scan both sides simultaneously, the Back
count is the same as the number of pages fed for duplex
scanning.
With an ADF that cannot scan both sides simultaneously, the
Back count is the same as the number of pages fed for duplex
rear-side scanning.
[0~9999999/1]
Selectable. Large copy jobs that cannot be loaded in the
ADF at one time.
Selectable. Feeding pages one by one through the ADF.
Selectable. Select "Mixed Sizes" on the operation panel.
Selectable. Originals of non-standard size.
Book mode. Raising the ADF and placing the original
directly on the platen.
5-104
28 April 2005