COPIER (B188)
Trays and Mylars
[A]
1. Install the rear copy tray holders [A] (! X 2 each), and insert the rear copy trays
[B].
NOTE: The rear copy tray holders must be installed to cover the holes and the
bare section of the frame.
2. Attach the large rear copy tray guide [C] in the center. Then attach the two small
rear copy tray guides on the two sides of the large guide.
3. Attach the small guide mylars [D]. The guide mylars must be on the rear copy
tray guide.
4. Hook the large guide mylar [E] on the rear center copy tray.
[B]
[C]
B010I206.WMF
1-20
28 April 2005
[E]
B010I207.WMF
[D]