Ricoh Aficio 480W Dolphin-C2 Service Manual page 222

28 April 2005
1950 Paper Exit Control
Adjusts the amount of paper grabbed at the edge for feeding.
[-50~+50/1 mm]
The friction from grabbing the paper 14 mm from the edge of the paper could cause
poor image quality where the paper was grabbed. If the image is very close to the edge
of the paper (less than 14 mm for example), adjust this setting for less than –14.
1955 Transport Fan Rotation
001 Very Thin Paper
002 Stand-by Condition Selects the transport fan rotation speed for stand-by mode.
SP (SERVICE PROGRAM) MODE TABLES
Selects the transport fan rotation speed for Japanese
chemical paper. Japan Only
0:Off, 1:100%, 2:20%]
The suction created by the transport motor below the paper
feed path keeps the paper straight. The force of this suction
could be too great for extremely thin paper.
0:8%, 1:100%, 2:70%, 3:60%, 4:50%, 5:40%, 6:30%
5-45