Ricoh Aficio 480W Dolphin-C2 Service Manual page 108

28 April 2005
[A]: Cleaning blade (! x 2)
Reinstallation
SP Adjustment
SP2923
Drum Set Mode – Execute. Applies toner to the
drum and blade to reduce friction between the
drum and cleaning blade. As a result of this, the
blade will not bend and will not scratch the
surface of the drum.
Drum Set Mode
Make sure that the drum protection sheet is
removed.
1. Set the pressure lever [A] to the left.
2. Plug in the power cable and switch the
main power switch on.
3. Press ".
4. Enter 107
5. Hold down # for more than 3 seconds.
6. On the touch panel, touch "Copy SP".
7. Enter 2923, press [#] , then push [Start] to
execute Drum Set Mode.
8. After it has finished, set the pressure
lever [A] to the right.
9. If you have replaced the OPC drum, enter
3001 002, press [#], then press Start to
initialize the ID sensor.
DRUM AND DEVELOPMENT UNIT
[A]
3-27
[A]
B188R941.WMF
B188R942.WMF