Asr 9000 Ethernet Line Cards - Cisco ASR 9000 Series Configuration Manual

Configuring the Three-Parameter Scheduler

ASR 9000 Ethernet Line Cards

SUMMARY STEPS
1. configure
2. policy-map policy-name
3. class class-name
4. shape average {percent percentage | rate [units]}
5. exit
6. policy-map policy-name
7. class class-default
8. bandwidth {rate [units] | percent percentage-value} or bandwidth remaining [percent percentage-value
| ratio ratio-value] or shape average {percent percentage | rate [units]}
9. service-policy policy-map-name
10. end
11. or commit
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2 policy-map policy-name
Example:
RP/0/RSP0/CPU0:router(config)# policy-map
bottom-child
Step 3 class class-name
Example:
RP/0/RSP0/CPU0:router(config-pmap)# class
Bronze
Step 4
shape average {percent percentage | rate [units]}
Example:
RP/0/RSP0/CPU0:router(config-pmap-c)# shape
average 1 mbps
Cisco ASR 9000 Series Aggregation Services Router Modular Quality of Service Configuration Guide, Release
6.1.x
208
Purpose
Enters global configuration mode.
Creates or modifies the bottom-level policy.
Assigns the traffic class that you specify to the policy map. Enters
policy map class configuration mode.
Shapes traffic to the indicated bit rate.
Configuring Hierarchical Modular QoS