Line Cards - Cisco ASR 1000 Series Hardware Installation Manual

Overview of the Cisco ASR 1000 Series Fixed
Ethernet Line Card
This chapter provides an introduction to the Cisco ASR 1000 Series Fixed Ethernet Line Cards. It
includes the following sections:
•
•
•
•
Introduction to the Cisco ASR 1000 Series Fixed Ethernet

Line Cards

This section lists and describes the line cards that are supported by the Cisco ASR 1000 Series Routers:
ASR1000-2T+20X1GE
The Cisco ASR 1000 Series Fixed Ethernet Line Card ASR1000-2T+20X1GE is a fixed-port Ethernet
line card for the Cisco ASR 1000 Series Aggregation Services Routers. This line card is capable of
40-Gbps full-duplex traffic forwarding using a fixed-port interface design. This line card has twenty 1-GE
ports and two 10-GE ports.
The small form-factor pluggables (SFP and XFP modules) allow the line card to be configured for
different media types (copper or fiber) and different optical requirements (single-mode fiber or
multimode fiber), as available. There is one power LED, one line card status LED, and 22 port or link
status LEDs, as shown in
Figure 1-1
OL-29623-03
Introduction to the Cisco ASR 1000 Series Fixed Ethernet Line Cards, page 1-1
Cisco IOS Software Release and Hardware Revision Requirements, page 1-9
Modular Optics Compatibility, page 1-10
Power Management, page 1-14
Figure
Cisco ASR 1000 Series Fixed Ethernet Line Card ASR1000-2T+20X1GE Faceplate
C H A P T E R
1-1.
Cisco ASR 1000 Fixed Ethernet Line Card Hardware Installation Guide
1
1-1