Bios Nvram; Figure 3-12: Check Active Bios Version; Figure 3-12: Bios Nvram Upgrade - Advantech sky-8100 User Manual

3.3.4 BIOS NVRAM

Use the following command to perform a BIOS NVRAM upgrade:
#ipmitool –I lanplus –H <BMC IP> -U administrator –P advantech hpm
upgrade <BIOS NVRAM image> -z 1500
#ipmitool –I lanplus –H <BMC IP> -U administrator –P advantech hpm
activate
BIOS NVRAM upgrade requires a reset of the x86 host to take effect. Use the command
below to reboot the system:
SKY-8100 Manual V05 20161229

Figure 3-12: Check Active BIOS Version

Figure 3-12: BIOS NVRAM Upgrade

Copyright 2016 Advantech Co. Ltd. All rights reserved. Page 84