Table of Contents
Advertisement
2.5 Advanced Platform Features
2.5.1 Intrusion Detection
The SKY-8100 supports intrusion detection by default. Removing or lifting the top cover
will activate an intrusion detection switch (location IS1). Chassis intrusion will be
signaled via an IPMI event by the BMC.
2.5.2 Watchdogs
The SKY-8100 provides two programmable watchdogs.
The first watchdog is based on intel's TCO timer and is integrated in the PCH. It may be
used to reset the system in case it bites due to malfunctioning application software to
restore the unit to a known good state. The TCO watchdog timer is supported under
Linux via a kernel driver (iTCO_wdt.ko). Please refer to Linux as well as PCH
documentation should you need more details.
nd
The 2
watchdog is implemented as an IPMI compliant watchdog timer in the BMC and
supports more sophisticated operation modes such as pre-timeout interrupts. Standard
utilities such as ipmitool can be used for configuring and strobing this watchdog. Please
refer to the IPMI specification for a detailed description of the BMC watchdog features
and operation.
2.6 Available Accessories and Related Products
2.6.1 Accessories
The following accessories are available for ordering. Please contact your Advantech
representative for a list of available and supported peripherals such as memory
modules, hard disks and solid state drives.
Table 2-28: Accessories
Order Number
1702002600-02
1702002605-02
1702031801
1700000237-01
1700024871-01
SKY-8100 Manual V05 20161229
Description
UL/CSA(USA) 125V 10A 1.83M 180D
Power cable 3P
European 10A/16A 250V 1.83M 90D
Power cable 3P
(UK) 5A-Fuse 183cm
Power cable 3P
PSE 12A 125V 1.83M Japan
Power cable 3P
DC power cord 180cm, open
Copyright 2016 Advantech Co. Ltd. All rights reserved.
Page 69
Advertisement
Table of Contents
