Figure 1-3: Putty Session Configuration - Advantech sky-8100 User Manual

Note!
Console is used for console redirection. This interface is available both at the
front as well as the rear side of the unit. Please make sure you only connect to
one of the two connectors as they are for alternate use, only.
The remainder of this section describes how to configure PuTTY on a Windows
platform for connection with the SKY-8100 serial console as a reference. Other
terminal programs may be used in a similar way as well.
Open up PuTTY and begin the configuration as shown below. Please use the
actual COM port's number on the client machine instead of "Console".
Specify "Console" under serial line and "115200" for speed, no parity, no flow
1.
control.
2. Check Serial for connection type.
Check "VT100+" for keypad in the keyboard submenu.
3.
Check "Colour" or "Both" for "Indicate bolded text" in the colours submenu.
4.
Click the "Open" button and a PuTTY terminal screen will appear.
5.
SKY-8100 Manual V05 20161229

Figure 1-3: PuTTY Session Configuration

Copyright 2016 Advantech Co. Ltd. All rights reserved. Page 20